latinkmfk.blogg.se

Chief architect x7 core catalog download
Chief architect x7 core catalog download










chief architect x7 core catalog download

Graphic designers use it for creating 2D designs, elevations, cross-sections, 3D designs, and 3D visualization. Chief Architect Premier X OverviewĬhief Architect Premier is 3D architectural software for residential and light commercial design. Chief Architect Premier X is an accessible application that is developed to create construction drawings, elevations, CAD details, and 3D models. See Supplemental Topics for Anchors or visit for more corrosion information.Download Chief Architect Premier X15 free offline standalone setup for Windows. Not for use in other corrosive or outdoor environments. Intended for some pressure-treated wood sill plate applications. Mechanical galvanizing meets ASTM B695, Class 65, Type 1. Titen HD® Anchor Product Data - Mechanically Galvanized using a torque wrench, driver drill or cordless 1/4" impact driver with a maximum permitted torque rating of 100 ft. * These models do not meet minimum embedment depth requirements for strength design and require maximum installation torque of 25 ft. Titen HD® Anchor Product Data - Zinc Plated Length of anchor is measured from underside of head to end of anchor. Models THD37134H and THD37212H do not meet minimum embedment depth requirements for strength design and require maximum installation torque of 25 ft.

chief architect x7 core catalog download

Larger holes are not required for wood or thinner cold-formed steel members. Suggested fixture hole sizes are for structural steel thicker than 12 gauge only.

  • Tighten the anchor into the base material until the hex-washer head contacts the fixture.
  • Insert the anchor through the fixture and into the hole.
  • (Overhead installations need not be blown clean.) Alternatively, drill the hole deep enough to accommodate embedment depth and the dust from drilling and tapping.

    chief architect x7 core catalog download

    Drill the hole to the specified embedment depth plus minimum hole depth overdrill (see table below) to allow the thread tapping dust to settle, and blow it clean using compressed air.

  • Drill a hole in the base material using a carbide drill bit the same diameter as the nominal diameter of the anchor to be installed.











  • Chief architect x7 core catalog download